Lenovo K6 Power Stock Firmware, Tool, Drivers & more – Download Now

ABOUT THE FIRMWARE

This particular firmware of the smartphone is based on the Android version 6.0 Marshmallow. Also, the firmware which you are about to download will work with pretty much all models of the K6 Power. As mentioned earlier, if you end up bricking your smartphone while installation any other custom ROM, etc. , then you can flash this RO, and your device will be running the stock ROM again with which it shipped initially.

Download Lenovo K6 Power Stock Firmware

Download

How to Flash Lenovo K6 Power using QPST Tool:

INSTALLATION

The first step here is to download the Lenovo K6 Power Firmware from the link from the link given above.
The next step is to install Qualcomm USB drives as well.
Once you are done with the installation, the next step is to extract the .zip file which you downloaded from the link above.
Now open the QPST Tool and browse the .mbm file from firmware folder.
Once you do that, the select build will automatically select the update or stock ROM.
Now click the load xml bottom, browse and select the “rawprogram_unsparse_without_qcn.xml” File and then choose Patch0.xml.
The next step is to switch off your phone and connect it to a PC.
Hit the donwload button and the donwload will start.
Once the donwload finishes, disconnect your phone and switch it on again.

Do make a note here that the first reboot will take anywhere from 5 to 10 minutes, so you need to be patient. Stay tuned for more such tutorials.

About Admin MC3

This is dummy text. It is not meant to be read. Accordingly, it is difficult to figure out when to end it. But then, this is dummy text. It is not meant to be read. Period.